CGVMS - F-84 TT-P-645B ZN-MOLY ALK PRI, F-04P503
- MSDS: CGVMS
- Manufacturer: SEAGRAVE COATINGS CORP OF VA
- Product Name: F-84 TT-P-645B ZN-MOLY ALK PRI, F-04P503
- National Stock Number: 8010-00-593-5612
Product Identification
Product ID:F-84 TT-P-645B ZN-MOLY ALK PRI, F-04P503
MSDS Date:10/29/1992
FSC:8010
NIIN:00-593-5612
MSDS Number: CGVMS
Responsible Party
PORTSMOUTH, VA 23701
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 757-488-4411
Cage: DO631
Contractor
Telephone: 1-800-424-9300
Cage: DO631
Ingredients
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10-<20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
NICKEL ANTIMONY TITANIUM YELLOW RUTILE
RTECS: 9999999ZZ
Fraction By Weight: 20%
OSHA PEL N/K
ACGIH TLV: N/K
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 10-20%
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/M3 RDUST
?? ZINC MOLYBDATE
RTECS: 9999999ZZ
Fraction By Weight: 25%
OSHA PEL N/K
ACGIH TLV: N/K
STODDARD SOLVENT; (MINERAL SPIRITS (PETROLEUM SOLVENT)).
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 15%
OSHA PEL N/K
ACGIH TLV: N/K
2.80 LBS/GAL
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO RESPIRATORY
TRACT, HEADACHE, DIZZINESS AND NAUSEA. SKIN CONTACT: PRIMARY
IRRITATION. EYE CONTACT: PRIMARY IRRITATION.
Explanation of Carcinogenicity:NICKEL COMPOUNDS: IARC MONO, VOL 49, PG
257, 1990:GROUP 2B. NTP 7TH ANNUAL REPORT ON CARCINS, 1994:ANTIC TO
BE CARCIN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT
MD. SKIN: FLUSH WITH WATER. EYES: FLUSH IMMEDIATELY WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD. INGESTION: DO
NOT INDUC E VOMITING.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:DRY CHEMICAL, WATER FOG, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILDUP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES AND ANYTHING WHICH COULD CAUSE
FIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN INGREDIENT
SECTION.
Other Precautions:PROVIDE NIOSH APPROVED RESPIRATORY PROTECTION AGAINST
FUMES GENERATED DURING BURNING.
Exposure Controls
Respiratory Protection:NIOSH APPRVD RESPIRATOR TYPES SUITABLE FOR MATLS
IN INGRED SECTION RECOMMENDED. NIOSH APPRVD CHEMICAL MECHANICAL
FILTERS RECOMMENDED WHEN VENT IS RESTRICTED. NIOSH APPRVD AIRLINE
TYPE RESPIRATORS OR H OODS RECOMMENDED IN CONFINED AREAS.
Ventilation:SUFFICIENT VENT IN VOL & PATTERN SHOULD BE PROVIDED TO KEEP
AIR CONTAM BELOW CURRENT APPLIC OSHA PEL OR ACGIH TLV LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . USE
PROTECTIVE CREAMS WHERE SKIN CONTACT IS LIKELY. REMOVE & (SUPDAT)
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY.
Supplemental Safety and Health
OTHER PROT EQUIP: WASH CONTAMINATED CLOTHING BEFORE REUSE.
Chemical Properties
Boiling Pt:B.P. Text:>232F,>111C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.59
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW LIQUID; ALIPHATIC ODOR.
Percent Volatiles by Volume:39.7
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.
Hazardous Decomposition Products:OXIDIZING MATERIALS CAN CAUSE A
VIGOROUS REACTION.
Disposal
Waste Disposal Methods:SOAK LIQUIDS WITH SAWDUST OR RAGS AND REMOVE.
FLUSH WITH WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD
BE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.